Two Ribbed Cold Rolling Ribbed Bar Machine

The two ribbed cold rolling ribbed steel bar machine is a kind of steel bar with two or three sides of a crescent shape formed by using hot-rolled wire rods through multiple passes of cold rolling to reduce the diameter and one pass to press the ribs and eliminate the internal stress. The diameter is generally 5 -12MM, commonly known as small thread, is mainly used for various cast-in-place plates, and its strength reaches Grade 3 steel standards. It is a deep-processed product of hot-rolled circular wire rods and an emerging high-efficiency construction steel.
Machine Features:
- HMI + PLC control, inverter to adjust speed flexibly.
- High automation from wire feeding to finished product.
- Hardened rollers for different wire diameters.
- Compact structure and hardened gearbox for big transmission and longer service life.
- The finished ribbed bar can be cut off or in the coil.


Steel Bar Making Machine Process:
The raw material is cold-plastically deformed by rolling, causing the internal grains of the raw material to be distorted, broken, and elongated. Through online heat treatment and temperature control, the distorted grains inside the raw material are recrystallized to form new, small, and uniform equiaxed grains, thereby improving product strength and toughness.
Pay-off stand–Inlet wire cage–Phosphorus removal machine to remove oxide scale–Lubricating machine–Diameter reducing machine (grinding raw material into oval shape)–Cold rolling rib press–Straightening machine–Flying shear–Blanking rack
Market:
The cold rolling ribbed bar machine is often exported to Mexico, Brazil, Thailand, Saudi Arabia, Malaysia, UAE, South Africa, Kazakhstan, Uzbekistan, Russia, Argentina, Colombia, Iraq, Chile, Paraguay, Peru, Zimbabwe, Algeria, etc.
Two Ribs Cold Rolling Ribbed Bar Machine Specification:
| Model | LZ-50000T |
| Max. inlet wire diameter | Φ6-14mm |
| Finished ribbed diameter | Φ5-13mm |
| Max. rolling speed | 150-180 m/min |
| Coiling Weight | 1T/2T/3T option |
| Max. straightening&cutting speed | 120m/min |
| Cutting length | 1-2m |
| Speed adjusting way | Frequency inverter |
| Control system | PLC+touch screen |
| Cut off error | ±5mm |
| Cutting way | Servo flying cutting |
| Rolling motor | 110KW |
| Cutting motor | 22KW(Servo flying cutting) |
| Installation length | 35*3.5m |

