High-speed-wire-drawing-machine

High speed wire drawing machine

High-speed wire drawing machine, manufacturing wire drawing. Use part of the steel wire rod as raw material and reduce its diameter as needed. It is the initial machine, indispensable for processing steel wire and metal mesh in different applications. With this machine, you don’t have to worry about buying and stocking large amounts of black or galvanized wire in different diameters. By owning this machine, you simply purchase the wire in its original condition and can reduce its diameter for various uses. Whether you sell wire of different diameters or manufacture various types of mesh, our wire drawing machines are indispensable for handling all possible diameters.

The accumulation block is usually installed on the first block of the wire drawing machine and is used when there is wire to prepare the wire or to prevent the wire from getting tangled into the pay-off machine when stopping the wire.

Tungsten carbide wear strips are used on wire drawing machine pulleys, rollers, and capstans and are particularly suitable for low carbon, stainless steel, and mechanically removed steel wires with a hardness of 1,488 HV.

Chromium oxide anti-wear tape is used on wire drawing machine winches, especially for low carbon, stainless steel, and mechanical descaling lines with a hardness of 2,500 HV.

Special blocks that collect high-quality wire directly from the last block of the wire drawing machine.

Special block with straightening device: controls the casting and spiraling of the wire at the end of the drawing machine before collecting the wire on the winding machine or coiler.

The specific production of rolling boxes can use rolling boxes or micro boxes designed and patented by RONGKUAI instead of molds to minimize the specific cost of drawing tools per ton of wire and maximize production efficiency.
The electric unit mixes soap in the mold box to prevent tunneling of the pre-mold lubricant.

Tempered safety glass and different suction points next to the pull block for dust and powder collection. It must be connected to the dust collection device.

Wire-Drawing-Production-Line-layout

 Parameter of wire drawing machine line:  

  Model   LZ-560
  Raw material   SAE1015, SAE1008, SAE1006 etc.
  Number of blocks   Max.12
  Inlet Wire diameter   6.5mm, 6mm, 5.5mm etc
  Outlet wire diameter   4mm, 3mm, 2.2mm, 2mm, 1.8mm, 1.6mm, 1.4mm etc
  Each motor capacity   22KW
  Drawing speed   Max.20m/second
  Each pot weight   1500KG

 Machine video :  

 Application:  

Fully automatic wire drawing equipment is used for drawing processing of low carbon, high carbon and stainless steel wire. Wires with different inlet and outlet diameters can be designed according to customer requirements.

steel-wire